SG Handyman
Engineering Pte. Ltd.
UEN:202443335C
Engineering Pte. Ltd.
UEN:202443335C
Kitchen Sink · Bathroom Basin · Laundry Tub · HDB · Condo
Need a new sink stopper installed or an old one replaced? SG Handyman Engineering fits, repairs, and replaces all types of sink drain stoppers across Singapore pop-up stoppers, lift-and-turn, push-pull, basket strainers, and rubber drain plugs. Same-day slots available for HDB, BTO, condo, and landed homes. PUB-licensed team, fixed quote before work starts.
We reply instantly · Same-day available
Jobs Completed
Google Rating
Licensed Team
Real feedback from Singapore homeowners and businesses who needed a sink stopper installed or replaced.
A broken or missing sink stopper is not just inconvenient it can let drain smells into your kitchen or bathroom and cause water to fill and overflow the basin unexpectedly. A proper replacement takes under an hour and solves it for years.
Every sink has a different stopper mechanism. We identify the type, source compatible parts, and install correctly so the drain seals and opens properly every time.
Kitchen sinks in Singapore HDB and condo units most commonly use a basket strainer stopper. Over time the rubber seal or strainer basket corrodes, loses grip, or the nut beneath the sink works loose — causing slow drains or leaks under the sink.
How We Help
We remove the old strainer, clean the drain flange area, fit a compatible replacement basket strainer with proper plumber’s putty or silicone seal, and test the drain for flow and water retention.
Bathroom basins in Singapore condos and HDB bathrooms typically use a pop-up stopper mechanism linked to a lift rod at the back of the tap. The pivot rod, clevis strap, or spring clip corrodes or breaks, leaving the stopper stuck open or unable to hold water.
How We Help
We access the pivot mechanism under the basin, replace the damaged pivot rod, clevis, or stopper body, adjust the lift rod height, and test the stopper for smooth open/close operation.
Laundry tub stoppers in Singapore service yards are often simple rubber or twist-style stoppers. These crack, warp, or go missing over time. A missing stopper means you cannot soak laundry and water drains away immediately during hand-washing.
How We Help
We measure the drain outlet, fit a compatible rubber stopper or basket strainer, check the drain waste pipe connection under the tub, and ensure a proper seal when closed.
Bathroom sink basin stoppers — particularly in older HDB bathrooms — are often flip-top or push-pop mechanisms that jam, crack, or corrode due to toothpaste, soap buildup, and humid Singapore conditions. A jammed stopper that will not open properly can cause standing water in the basin.
How We Help
We disassemble the stopper and linkage assembly, clear any blockage, replace corroded parts, and reassemble with proper adjustment so the stopper opens and closes smoothly.
Pop-up drain stoppers are the most common type found in Singapore condominium bathrooms and renovation-upgraded HDB bathrooms. They use a hidden pivot rod linked to a lift rod behind the faucet. These mechanisms wear out after years of daily use and need a direct replacement.
How We Help
We supply and install a compatible pop-up drain assembly, adjust the pivot rod depth and clevis strap length, and verify smooth stopper travel before leaving. We can also match common brands such as Grohe, American Standard, and Jaquar.
Lift-and-turn stoppers are common in larger bathroom basins and freestanding bath setups. The mechanism requires the user to lift and twist to open or close. When the centre screw corrodes or the rubber seal at the base wears out, the stopper either will not stay closed or cannot be removed for cleaning.
How We Help
We unscrew and assess the lift-and-turn mechanism, replace the stopper body or internal screw and seal as needed, and reinstall with the correct torque and sealant to prevent future loosening.
Simple, fast, and clear no waiting weeks for a plumber when your sink drain stopper needs fixing today.
Send the sink type, photos, and your address. We identify the stopper type and quote quickly from photos.
Our plumber brings common stopper types, pivot rods, basket strainers, and sealant for most Singapore sink drain sizes.
We check the existing stopper mechanism, drain flange condition, and under-sink connections before starting work.
We fit the correct stopper, seal the drain flange properly, and test by filling and draining the sink before leaving.
30 to 90-day workmanship warranty. If the stopper fails because of our installation, we come back and fix it.
A correct sink stopper installation means the right type is fitted for your drain size, the mechanism operates smoothly, and the seal holds water without leaking under the sink. We assess first, install correctly, and test before leaving.
Price confirmed before work starts. No hidden add-ons after the job is done.
| Service Type | Starting From |
|---|---|
| Kitchen sink basket strainer replacement (labour) | From $60 |
| Pop-up drain stopper replacement — basin | From $70 |
| Wash basin stopper + pivot rod replacement | From $80 |
| Lift-and-turn or push-pull stopper replacement | From $70 |
| Laundry tub stopper fitting | From $50 |
| Full drain assembly replacement (supply + install) | From $100 |
| Multiple sink stoppers — same visit | Quoted on request |
* All prices are estimates for labour. Parts quoted separately where applicable. GST may apply for commercial projects.
At SG Handyman Engineering Pte. Ltd., we confirm the price before any sink stopper installation or replacement begins. If extra parts or a different stopper type is needed, we explain the cost and get your approval first. No surprise charges once the plumber is inside your home.
Because when a sink stopper breaks or is missing, you want someone who comes with the right part, fits it correctly, and does not leave you with a slow drain or a leak under the cabinet.
Sink drain and stopper work involves your home's waste pipe system. Our PUB-licensed team handles it correctly for HDB, condo, and commercial properties.
Send us a photo of the drain on WhatsApp and we will confirm the earliest same-day slot for your area across Singapore.
You get a fixed quote before any installation begins. If a different stopper type or extra part is needed, we explain the cost and ask first.
We identify the stopper mechanism — basket strainer, pop-up, lift-and-turn, or push-pull — and bring the right replacement rather than guessing on-site.
Our workmanship carries a 30 to 90-day warranty depending on the job. A correctly installed stopper should last years, not days.
From Tampines to Jurong, Woodlands to Tanjong Pagar, we handle sink stopper installations across all HDB estates, condos, and landed homes.
Most sink stopper problems build up from daily use. These are the issues we see most often in Singapore HDB, condo, and landed home kitchens and bathrooms.
Tap and mixer leaks often start from worn washers, ceramic cartridges, or rubber seals. The drip looks small, but it can stain basins and waste water every day.
Under-sink joints, bottle traps, flexible hoses, and valves can loosen over time from daily use, vibration, or previous poor installation.
Bar soap and body wash leave a waxy residue on pipe walls. In Singapore’s humidity, this accumulates faster than in drier climates. Combined with hair or food particles, soap scum creates stubborn blockages.
Bathroom leaks may come from failed sealing around basins, shower screens, or wet areas. The water then travels into cabinets, walls, or the floor below.
A faulty inlet valve, flush valve, float, or seal can make the toilet refill all day. Many homeowners only notice when the water bill goes up.
In condos and HDB blocks, a ceiling leak may come from the unit above or a shared pipe area. We help identify what is likely before you spend money on the wrong repair.
We use the correct stopper type for your drain, the right sealant, and test every installation before leaving — for HDB, condo, and commercial sinks across Singapore.
From a missing kitchen strainer to a stuck bathroom basin pop-up stopper, we handle all sink stopper installations and replacements across Singapore same day where possible.
Local plumbers available for sink stopper installation and replacement across all HDB towns, condominiums, landed homes, and commercial properties in Singapore.
Orchard · Toa Payoh · Queenstown · Novena · Redhill · Bendemeer · Bishan
Tampines · Bedok · Punggol · Hougang · Sengkang · Pasir Ris · Changi
Jurong · Bukit Batok · Clementi · Choa Chu Kang · Pioneer · Boon Lay
Woodlands · Yishun · Ang Mo Kio · Sembawang · Marsiling · Khatib
Serangoon · Kovan · Paya Lebar · Bartley · Bidadari
All HDB towns. BTO, DBSS, and older resale estates served island-wide
MCST coordination handled for all private developments across Singapore
Marina Bay · Tanjong Pagar · Outram · Harbourfront · Sentosa Cove
Answers to common questions Singapore homeowners ask before booking sink stopper installation or replacement.
Sink stopper installation and replacement in Singapore typically starts from $50 to $100 for labour on a standard kitchen sink strainer or bathroom basin pop-up. A full drain assembly replacement including parts may cost more depending on the stopper brand and type. We always confirm the price before work starts.
Yes. Same-day sink stopper installation is available across Singapore for most HDB, condo, and landed homes. WhatsApp us a photo of the sink and drain type and we will confirm the earliest available slot in your area.
Avoid running water into the affected basin or sink until the stopper is properly installed. If the drain is open without a stopper, keep it away from small items or debris that can fall in and cause a blockage further down the pipe.
Not always. The most common issue is a failed pivot rod, corroded clevis strap, or a cracked stopper body — none of which require replacing the tap or mixer. We assess the stopper mechanism first and advise on what actually needs replacing.
Yes. We install and replace all sink stopper types found in Singapore homes and commercial spaces — basket strainers, pop-up mechanisms, lift-and-turn, push-pull, flip-top, and rubber plug styles — across kitchen sinks, bathroom basins, laundry tubs, and bar sinks.
We can identify the stopper type from a clear photo sent on WhatsApp. Common brands in Singapore include Grohe, American Standard, Jaquar, Cotto, and various OEM fittings in HDB and BTO bathrooms. If you are unsure of the brand, send us a photo and we will advise on compatibility.
Yes. Completed sink stopper installations and replacements come with a 30 to 90-day workmanship warranty depending on the job type and parts used. If the installed stopper fails within the warranty period due to our workmanship, we will check and rectify.