SG Handyman
Engineering Pte. Ltd.
UEN:202443335C
Engineering Pte. Ltd.
UEN:202443335C
Mixer Tap · Thermostatic Valve · 2-Way Tap · Shower Cartridge
We reply instantly · Same-day available
Jobs Completed
Google Rating
Licensed Team
Real feedback from Singapore homeowners and businesses who needed help fast.
A shower tap dripping overnight wastes more water than most people realise and the constant dampness can damage your bathroom walls and grout over time. Proper replacement costs far less than the fix later.
From a basic HDB shower valve to a concealed thermostatic tap in a condo, we handle all shower tap types across Singapore with the right parts and tools.
The most common shower tap in Singapore HDB and condo bathrooms. Combines hot and cold water through a single handle or two handles. Worn O-rings, corroded valve seats, and old cartridges cause dripping or temperature issues.
What we do
We assess whether the cartridge can be replaced or a full tap body swap is needed. We carry common cartridge sizes and supply quality replacement taps on request.
Thermostatic valves maintain a preset water temperature automatically. When the thermostat element fails, you get sudden hot or cold water changes mid-shower a sign it needs replacing. More common in condo and landed bathrooms.
What we do
We identify the valve brand and model, source the correct thermostatic cartridge or element, replace it cleanly, and verify temperature stability before leaving.
The standard 2-way tap in many HDB bathrooms controls one outlet for shower and another for the bath tap or hand shower via a diverter. When the diverter fails or the tap body leaks, water pressure to the showerhead drops noticeably.
what we do
We replace the 2-way tap with a compatible model, connect it properly to your existing pipework, and test both outlets before sealing the wall surround.
Concealed shower systems hide the valve body behind the wall only the trim and handle are visible. These require experience to open cleanly, identify the correct cartridge, and reseal without damaging tiles unnecessarily.
what we do
We access the concealed valve box, replace the cartridge or internal parts without removing tiles where possible, and advise clearly if the wall needs to be opened further.
If your shower tap body is still in good condition but the tap drips, feels stiff, or the handle spins loosely, the cartridge inside may just need replacing. This avoids the cost of a full tap replacement and takes less time.
What we do
We disassemble the tap, identify the cartridge type, source a compatible replacement, and reinstall. If the cartridge is discontinued or the tap body is corroded, we advise on full replacement.
A shower tap that drips at the spout, leaks around the handle, or weeps from the wall connection is wasting water and potentially damaging your bathroom grout, wall cavity, or the unit below yours in an HDB or condo block.
How We Clear It
We identify the source first, the leak is from the O-ring, washer, valve seat, or connection point, carry out the targeted repair, and test under running water before leaving.
Send photos of the tap, the issue, and your property type. More detail means a faster and more accurate quote.
We determine if it is a cartridge swap, full tap replacement, or valve repair and give you a fixed price before we come.
The plumber brings common shower tap cartridges, tools, and replacement parts suitable for your tap type and property.
We replace or repair the shower tap, seal it properly against the wall, and test water flow, temperature, and pressure.
Completed shower tap replacement and repair work comes with workmanship warranty you get clear advice on aftercare too.
A good shower tap replacement is not just swapping the handle. We check the valve seat, O-rings, supply connections, and wall seal so the new tap lasts as long as it should not just until the next rainy season.
Price confirmed in writing before work starts. No emergency surcharges added without notice.
| Service Type | Typical Starting Price |
|---|---|
| Shower tap cartridge / O-ring replacement (labour) | From $80–$120 |
| Standard shower mixer tap replacement (tap supplied by owner) | From $100 |
| Standard shower mixer tap replacement (supply + install) | From $150 |
| 2-way shower tap replacement (HDB standard) | From $120–$180 |
| Concealed shower valve / cartridge replacement | From $150 |
| Thermostatic valve repair or cartridge swap | From $180 |
| Full thermostatic shower system replacement | Site quote |
| Leaking shower tap repair (O-ring / washer / valve seat) | From $80 |
All prices exclude GST. Final quote confirmed on-site before any work begins. For full pricing, see our pricing page.
No surprise charges after the plumber arrives. We confirm the scope and tap model, explain what needs to be done, and get your approval before any work begins.
Because when your shower tap drips or fails, you want someone who gives you a straight answer, turns up on time, and does it right the first time.
Shower tap replacement involves connecting to your home's water supply pipes. In Singapore, this should be done by a PUB-licensed plumber. Our team is properly licensed for residential and commercial plumbing work.
A constantly dripping shower tap should not wait a week. WhatsApp us with a photo and your location, and we will confirm the earliest available same-day slot for your HDB, condo, or landed home.
We do not push for a full replacement if the cartridge or O-ring can solve the problem. We assess the tap honestly, tell you the cost of both options, and let you decide what makes sense for your situation.
Mixer taps, thermostatic valves, 2-way taps, concealed systems, diverter valves, pressure balance valves — we handle all types found in Singapore HDB, condo, landed, and commercial bathrooms.
Most completed shower tap replacements and repairs come with a 30 to 90-day workmanship warranty. If the repaired point fails within the warranty period due to our workmanship, we will check it.
From Tampines to Jurong West, Woodlands to Bedok, we cover all HDB estates, condo developments, and landed properties across Singapore with local plumbers who know the area.
Most shower tap problems build up slowly. These are the everyday causes we find in HDB flats, BTO units, condo bathrooms, and landed homes across Singapore.
The most common reason for a dripping shower tap. Cartridges and rubber washers degrade over years of daily use. Once worn, they can no longer seal the water flow properly when you turn the tap off.
The valve seat connects the tap body to the spout. When sediment and mineral deposits build up from Singapore’s water supply, the valve seat corrodes unevenly and causes dripping near the handle — even after turning it fully off.
O-rings seal the junction between different parts of the shower tap. Constant heat and water pressure gradually degrade the rubber, causing leaks around the handle area or where the tap body meets the wall.
In thermostatic shower valves, the thermal element that senses water temperature can fail or seize over time. This causes unpredictable temperature swings, scalding risk, or a tap that will not reach the set temperature.
Singapore’s water contains minerals that build up inside the tap body and on the shower valve cartridge. This causes the handle to become stiff, reduces water flow, and can jam the diverter so it no longer switches between outlets cleanly.
Most shower taps in Singapore last between 8 and 15 years depending on brand and usage frequency. Beyond that, the internal components and the tap body itself may be too corroded for a repair-only approach.
We keep our work clean, safe, and appropriate for HDB regulations, condo MCST requirements, and good plumbing practice.
You have a basic resale HDB shower or a high-end concealed thermostatic system in a Bukit Timah bungalow? Our PUB-licensed team handles shower tap replacement across all Singapore property types with the right approach each time.
Orchard · Toa Payoh · Queenstown · Novena · Redhill · Bendemeer · Bishan
Tampines · Bedok · Punggol · Hougang · Sengkang · Pasir Ris · Changi
Jurong · Bukit Batok · Clementi · Choa Chu Kang · Pioneer · Boon Lay
Woodlands · Yishun · Ang Mo Kio · Sembawang · Marsiling · Khatib
Serangoon · Kovan · Paya Lebar · Bartley · Bidadari
All HDB towns. BTO, DBSS, and older resale estates served island-wide
MCST coordination handled for all private developments across Singapore
Marina Bay · Tanjong Pagar · Outram · Harbourfront · Sentosa Cove
Real questions from Singapore homeowners before booking shower tap replacement or repair.
Shower tap replacement in Singapore starts from around $80 to $150 for labour on a standard HDB or condo mixer tap, depending on the tap type and whether a cartridge swap or full replacement is needed. Thermostatic valve or concealed system work starts higher due to the complexity involved. The tap itself, if supplied by us, is quoted separately. We always confirm the full price before work starts, no surprises.
Yes. In Singapore, plumbing work that involves the water supply — including connecting or disconnecting shower taps from the hot and cold water pipes should be carried out by a PUB-licensed plumber. DIY shower tap replacement risks water damage, non-compliant work that may void your HDB or condo’s plumbing warranty, and future insurance issues if a leak damages the unit below.
Changing a shower tap handle or trim piece is manageable for someone handy. But replacing the tap body, valve, or cartridge requires isolating the water supply correctly, identifying the right replacement parts for your exact valve model, and re-sealing the wall opening properly. Getting this wrong leads to leaks inside the wall cavity which can be a much costlier fix than hiring a plumber in the first place. For shower taps in Singapore, a PUB-licensed plumber is the safer option.
Most standard shower mixer tap or 2-way shower tap replacements take 30 minutes to 1.5 hours. Concealed shower valve work or thermostatic system replacements can take 2 to 3 hours depending on wall access and the tap brand. If the wall needs to be opened, we will advise you before starting. We always test water flow, temperature, and check for leaks before leaving.
Yes, in many cases. If your shower tap body is in good condition but is dripping, feels stiff, or has temperature issues, a cartridge replacement is usually enough and significantly cheaper than a full tap swap. We assess this on-site and carry common shower tap cartridge sizes. If the cartridge for your model is discontinued or the body is too corroded to salvage, we will advise a full replacement honestly.
Key signs include: persistent dripping even after turning the tap fully off, a stiff or hard-to-turn handle, sudden unexplained temperature changes mid-shower, visible corrosion or mineral buildup on the tap body, a handle that spins loosely or has cracked, and reduced water pressure through the showerhead even though the main supply is fine.
Yes. Our workmanship comes with a 30 to 90-day warranty depending on the job type and parts used. If the same repaired point leaks again within the warranty window due to workmanship, we return to check it. Warranty does not cover new leaks from old neighbouring pipes or unrelated fixtures.