SG Handyman
Engineering Pte. Ltd.
UEN:202443335C
Open Hour: 24/7
Emergency Services
Call Now
+6580135520
Engineering Pte. Ltd.
UEN:202443335C
Emergency Services
+6580135520
New BTO walls have a chalky surface that can cause peeling, so a proper sealer is applied first, followed by two coats of Nippon or Dulux paint for a lasting finish. For older resale HDB flats, damaged areas are repaired and skim coated before painting to ensure a smooth, even result. Every job is done with careful surface preparation to ensure the paint bonds properly and stays fresh for years.
Condo painting involves approvals and careful handling, so MCST coordination, security passes, and lift protection are all managed upfront for a smooth process. Microfibre rollers and airless spray systems deliver clean, even finishes, while parquet and marble floors are fully protected with heavy-duty canvas for a neat, damage-free job.
CBD office and retail painting is scheduled on weeknights or weekends to avoid downtime, keeping your operations running without disruption. Professional lighting is used to catch imperfections, while moisture-resistant, washable coatings are applied for F&B and retail spaces, with reinstatement painting handled for smooth lease handovers.
Exterior painting for landed homes requires proper access, so aluminium scaffolding or boom lifts are used for safe, full coverage, including soffits and parapet walls. Weather-resistant, anti-carbonation coatings protect against UV and mould, while interior work covers high stairwells and double-volume spaces with precise, well-equipped execution.
Singapore averages over 2,400mm of rain a year and UV index levels that routinely hit 12+. A standard exterior emulsion without a weatherproof primer will chalk, crack, and mould within 18 months in these conditions. Every exterior job we do uses a dedicated weather-barrier primer before the topcoat — this is the single most important step for longevity.
Professional paint jobs show their worth over time. Two coats, proper surface prep, and precision masking prevent peeling, patchiness, and costly repaints.
We use low-VOC paints certified under Singapore's Green Label scheme. Low VOC means the fumes that cause headaches, eye irritation, and respiratory sensitivity are reduced to trace levels. You can sleep in the room the same night.
Painting over mould without treating it first guarantees it returns within months. We apply a biocidal wash, allow it to cure, then prime with a mould-resistant base. This is the correct sequence — not just a cosmetic fix.
One coat of any emulsion, even premium brands, will show variation in sheen and coverage under direct light. Two full coats are our baseline on every job. For dark-to-light colour changes, we add a third coat at no surprise charge.
Before we pack up and call it done, we will walk you through the entire space under good lighting. Any holidays, sags, or texture inconsistencies get addressed on the spot, not on a follow-up visit.
SG Handyman Engineering do not have a commercial arrangement with any paint brand that forces us to recommend products that are not right for your job. We mainly use Nippon Paint and Dulux because their product ranges are widely trusted in Singapore and well suited to local humidity and indoor conditions.
Momento, Odour-Less, and Weatherbond ranges used for interior and exterior residential painting, designed for Singapore’s humidity.
Ambiance, WeatherShield, and Kitchen & Bathroom specialist paints for long-lasting and durable finishes.
Jotun Jotashield and Sennelier options available for high-end decorative walls on request.
All interior paints supplied carry Singapore Green Label certification for healthier indoor air quality.
Water-based formulas used wherever possible for faster drying, easier cleanup, and reduced environmental impact.
Call or WhatsApp us to book a free, no-obligation colour consultation at your home or office.
Peeling paint, cracks, or damp spots are signs of deeper issues. Painting over them may look fine at first, but it won’t last. Proper surface preparation is key, fix the root problem, then paint it right for a smooth, long-lasting finish.
We check for dampness, hollow patches, mould, and existing paint condition. We bring paint chip fans and discuss your colour direction based on your lighting and furniture.
Furniture moved to the centre and wrapped. Floors covered with canvas drop cloths. Sockets, switches, trim, and ceiling lines masked with fine-line tape. No roller touches a wall until this is done.
Loose paint scraped back, cracks filled with Gyproc or flexible filler, surfaces sanded smooth. Sealer coat applied to new plaster or chalky BTO walls. Mould-resistant primer used where any biological growth was present.
Two full coats minimum of your chosen colour and finish, applied with microfibre rollers on large flat areas and quality brushes on trim and reveals. Spray application used for ceilings and feature walls on request.
Full room inspection with the homeowner under good lighting. Touch-ups done on the spot. Protective materials removed and workspace left clean. Paint batch details provided so touch-up purchases are colour-accurate.
Power point installation, ceiling fan fitting, and lighting installation are best done before painting begins — we can coordinate both.
Water damage and ceiling staining from leaks need to be repaired before any repainting, we fix the source first.
Built-in wardrobes, feature wall panels, and carpentry trim work should be completed before the final paint coat.
For minor wall repairs, hook installations, and partition work that needs doing alongside your paint job.
Orchard · Toa Payoh · Queenstown · Novena · Redhill · Bendemeer · Bishan
Tampines · Bedok · Punggol · Hougang · Sengkang · Pasir Ris · Changi
Jurong · Bukit Batok · Clementi · Choa Chu Kang · Pioneer · Boon Lay
Woodlands · Yishun · Ang Mo Kio · Sembawang · Marsiling · Khatib
Serangoon · Kovan · Paya Lebar · Bartley · Bidadari
All HDB towns — BTO, DBSS, and older resale estates served island-wide
MCST coordination handled for all private developments across Singapore
Marina Bay · Tanjong Pagar · Outram · Harbourfront · Sentosa Cove
+65 8013 5520
+65 8013 5520
1 N Bridge Rd, #30-02 High Street Centre, Singapore 179094
Office Hours: 9 Am to 6 Pm. Open Hour: 24/7 For Emergency Service
Island-wide Singapore
Workers
Certified
Always On Call
A standard 4-room flat with two colours and a white ceiling takes one to two days with a two-person team. An empty BTO can often be finished in a single day. A resale flat with heavy furniture or significant wall preparation work may need two full days. We give you a realistic timeline after the site visit, not an optimistic number to win the quote.
Yes, and skipping it is the single most common reason BTO paint jobs peel within a year. New HDB plaster is highly alkaline, and the surface is porous. Standard emulsion applied directly onto it will chalk and flake. A proper sealer neutralises the pH, seals the surface, and gives the topcoat something to bond to. It adds to the cost upfront and saves you a repaint within two years.
Not with the low-VOC options we use. Traditional oil-based paints produce strong fumes that linger for days. The Nippon Odour-Less and Dulux Ambiance ranges we use as standard are water-based with VOC levels below 5g/L. The paint odour clears within a few hours of the team leaving with windows open. Most residents are comfortable sleeping in the flat the same night.
Painting over mould without treating it is a purely cosmetic fix that lasts a few months before the mould bleeds back through. We always treat existing mould with a biocidal solution, allow it to cure fully, then apply a mould-inhibiting primer before any topcoat. If the mould is being caused by an active water leak or condensation problem, we recommend fixing that first — otherwise any paint job will fail regardless of quality.
A feature wall is a single wall treated differently from the rest, a contrasting colour, a textured finish, or a limewash or stone-effect coating. It typically adds $150 to $400 to a residential painting job, depending on the size of the wall and the finish selected. We discuss this during the site visit and include it as a separate line item in the quote so you can decide.
Yes. We cover our workmanship with a warranty on all painting projects. If peeling, bubbling, or visible application defects appear within the warranty period due to our application process, we return and rectify it at no cost. The warranty does not cover damage caused by water leaks, physical impact, or condensation from air-conditioning units — which are building or appliance issues, not painting issues.
We can get very close using the paint brand’s colour-matching service if you know the original colour code. If you do not know the code, we can pull a paint chip from an inconspicuous section of the wall and cross-reference it at the paint counter. It will not be a perfect invisible match in every lighting condition, but it is typically very close. For feature walls or bold colours, we always recommend keeping a small amount of the original mixed paint for touch-ups.